Connecting up, Connecting using an hdmi cable, About hdmi – Pioneer BDP-320 User Manual
Page 13: 02 chapter 2
13
En
02
Chapter 2
Connecting up
Be su
re to turn off the power and unplug the power cord
f
rom the power outlet whenever making or changing
connections.
Afte
r connecting, make the settings at the
Setup
Navigator menu according to the type of cable
connected (
page 18).
Also
refer to the operating instructions of the device
being connected.
Connecting using an
HDMI cable
The audio and video signals can be t
ransferred to HDMI-
com
patible devices as digital signals with no loss of
sound o
r video quality.
Note
• Make the settings at the
Setup Navigator menu
acco
rding to connected HDMI-compatible device
(
page 18).
• The
HDMI indicator on the player’s front panel lights
when an HDMI-com
patible device is connected to an
HDMI OUT terminal (page 11).
• 1080
p video signals may not be output, depending on
the HDMI cable being used.
About HDMI
This
player incorporates High-Definition Multimedia
Inte
rface (HDMI™) technology.
HDMI, the HDMI Logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
The
player supports Deep Color.
The conventional
players can transmit a video signal with
8 bit colo
r depth in the YCbCr 4:4:4 or RGB formats, the
players supporting Deep Color can transmit a video
signal with a colo
r bit depth of greater than 8 bits per
colo
r component. Subtle color gradations can be
reproduced when connected to a TV that supports Deep
Colo
r.
This
product is compatible with “x.v.Color” that have the
ca
pability to realize a wide-gamut color space based on
the xvYCC s
pecifications.
Playing video signals confo
rming to “xvYCC” standards
on this
player when connected to an “x.v.Color”-
com
patible TV, etc., expands color reproduction
ca
pabilities, allowing natural colors to be reproduced
mo
re faithfully than ever.
“x.v.Colo
r” is a promotion name given to the products that
have the ca
pability to realize a wide-gamut color space
based on the inte
rnational standard specifications
defined as xvYCC.
“x.v.Color”,
and
are
trademarks of Sony Corporation.
Audio signals that can be
transferred with the player’s HDMI
OUT terminal
• Dolby T
rueHD
• Dolby Digital Plus
• Dolby Digital
• DTS-HD Maste
r Audio
• DTS-HD High Resolution Audio
• DTS Digital Su
rround
• MPEG-2 AAC
• Linea
r PCM
Linea
r PCM audio signals meeting the following
conditions can be out
put:
– Sam
pling frequency: 32 kHz to 192 kHz
– Numbe
r of channels: Up to 8 (up to 6 for a 192 kHz
sam
pling frequency)
Fo
r details, see About the audio output settings on
page 45.
About the HDMI High Speed
Transmission
This
player outputs 1080/50p, 1080/60p and Deep Color
video signals. If you
r TV supports 1080/50p, 1080/60p or
Dee
p Color signals, use a High Speed HDMI™ cable in
o
rder to take advantage of the maximum performance the
player and TV can offer. Also set
HDMI High Speed
Transmission to On (page 38).
High S
peed HDMI™ cables are tested to carry signals up
to 1080
p. 1080/50i, 1080/50p, 720/50p, 1080/24p, 1080/60i,
1080/60
p and 720/60p video signals that are capable of
Dee
p Color can also be carried.
320_VXJ5_IBD_EN.book 13 ページ 2009年2月25日 水曜日 午前10時57分