Pioneer X-SMC3-K - Manual (Page 27)

Changing the settings 12
27
En
English
Français
Español
Chapter 12:
Changing the settings
The factory default settings are indicated in italic.
1 Press SET UP to show the Initial Setup screen.
2 Use
/ to select the item, then press ENTER.
3 Follow the descriptions on the main display to change the setting.
Settings What it does
Timer Setting Setting the wake-up timer and the time the unit will be turned on.
Cloc
k Setting
Clock Display
(On/On (Standby)/Off) • Select On to show clock on the sub display.
• When On (Standby) is selected, the clock will appear in the sub-display even when the power is
set to Off.
Time Format
(12H/24H) Select the 12-hour (12H) clock or 24-hour (24H) clock.
Clock Adjustment
(Auto/Manual) • Select Auto to adjust the clock automatically.
• Select Manual to adjust the clock manually. How to adjust the clock, see page 28.
Time Zone
Default setting is GMT ±0. Select the time zone of your area. Time Zone can be adjusted only when Clock Adjustment is set to
Auto.
e.g. If you are in Hawaii (GMT -10:00), use
/ to select Hawaii and press ENTER.
Daylight Saving Time
(On/Off) Select On when daylight saving time is in effect. The time advances 1 hour.
Display Setting
(Level3/Level2/Level1) Dims or brightens the display.
Netw
o
rk S
e
tti
n
g
Network Type
(Wired/Wireless/Auto) Select the network connection type.
When Auto is selected, the network type is automatically switched between Wired and Wireless. It
is depending on the occasion when the unit is powered on.
Network Configuration
(Wired Setting/Wireless
Setting) For details on settings, see page 29.
WPS
(PBC/PIN Input) WPS connection settings, see page 31.
Friendly Name The name of this system displayed on a computer or other device connected to the network can be
changed.
X-SMC3_SYXZT8_En.book 27 ページ ２０１１年６月９日 木曜日 午後４時６分