Pioneer X-SMC3-K - Manual (Page 13)

Getting started 04
13
En
English
Français
Español
Chapter 4:
Getting started
When you use the unit for the first time, the following screens
will be displayed.
Set up the following items to customize the unit.
1 Press STANDBY/ON.
About twenty seconds after turning on the power, the
following splash screen appears. About one minute is
required between turning the power on and completion of
startup.
Setting Quick Start Mode to On will allow faster startup
(page 28).
2 Use  PLAY to activate Demo Mode or use
 STOP to deactivate Demo Mode.
The screen below will automatically appear after the screen in
step 1.
• Demo Mode also can be activated in Auto mode select
(page 28).
• When Start is selected, the demo mode operates. When
starting up the next time, it will be necessary to set step
3.
• If Cancel is selected, operation will automatically
proceed to step 3.
3 Use
/ to select the menu language of
this unit, then press ENTER.
The setting is done.
Select "Start" to start
Demo mode; otherwise
"Cancel".
[PLAY] Start
[STOP] Cancel
Language
Français
Deutsch
Nederlands
English
X-SMC3_SYXZT8_En.book 13 ページ ２０１１年６月９日 木曜日 午後４時６分