Pioneer DVR-520H-S - Manual (Page 27)

Getting started 04
27
En
English
Set the date (day/month/year) and time, then
press ENTER to make all the settings.
Use the / (cursor up/down) buttons to change
the value in the highlighted field.
Use the
/
(cursor left/right) buttons to move
from one field to another.
• You can go back to the previous screen at anytime in
the Setup Navigator by pressing RETURN .
7 Select the TV screen type, ‘Standard (4:3)’ or
‘Wide (16:9)’.
Use the / (cursor up/down) buttons to select, then
press ENTER .
8 Is this recorder connected to an AV amplifier/
receiver for digital audio?
Use the
/
(cursor up/down) buttons to select
Connected , or Not Connected , then press ENTER .
• If you select Not Connected , that completes the
setup. Press ENTER to exit the Setup Navigator, or
select Go Back if you want to go back and start again.
• Select the digital audio formats your AV amplifier/
receiver is compatible with.
Use the / (cursor up/down) buttons to select Dolby
Digital , Dolby Digital, DTS or PCM only , then press
ENTER .
• Check the operating instructions that came with your
AV amplifier/receiver if you’re not sure what it’s
compatible with.
9 Is your AV amplifier/receiver compatible with 96
kHz PCM digital audio?
Use the / (cursor up/down) buttons to select
Compatible , Not Compatible , or Don’t Know , then
press ENTER .
• Check the operating instructions that came with your
AV amplifier/receiver if you’re not sure.
10 Press ENTER to exit the Setup Navigator, or select
‘Go Back’ if you want to start again.
That completes basic setup using the Setup Navigator.
Other settings you can make
After setting up using the Setup Navigator, you should be
ready to start enjoying your DVD recorder. It’s possible,
however, that you may want to make a couple of
additional settings, depending on how the recorder is set
up for terrestrial TV broadcasts.
• Manual channel setting – This setting lets you skip
channels where there is no station, as well as
manually tune to stations. See
Manual CH Setting on
page 100.
• ShowView channel setting – This setting lets you
assign guide channels to ensure that the
ShowView™ programming system works correctly.
See
ShowView CH Setting on page 101.
• Setting up the remote to control your TV – You can set
up the supplied remote control to control many
brands of TV. See
Setting up the remote to control your
TV on page 112.
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Clock Set
Input Line System
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator
Setup Navigator
Manual Clock Setting 2/2
Date
Time
Time Zone
Summer Time
01 01 2004 THU
00 00
Austria
Vienna
On
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Clock Set
Input Line System
On Screen Display
Front Panel Display
Power Save
Remote Control SetSetup Navigator
Setup Navigator TV Screen Size
Wide (16:9)
Standard (4:3)
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Clock Set
Input Line System
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator
Setup Navigator
AV Amp Digital Connect
Connected
Not Connected
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Clock Set
Input Line System
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator
Setup Navigator
AV Amp Compatibility
Dolby Digital
Dolby Digital, DTS
PCM only
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Clock Set
Input Line System
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator
Setup Navigator
96kHz PCM Compatible
Compatible
Not Compatible
Don't Know
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Clock Set
Input Line System
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator
Setup Navigator
Setup is complete!
Enjoy using your DVD recorder!
Finish Setup
Go Back
Initial Setup
DVR-04_HDD_EU.book 27 ページ ２００４年４月１１日 日曜日 午後１時４５分