Pioneer VSX-520-S - Manual (Page 39)

The System Setup menu 06
39
En
English
Français
Español
Chapter 6:
The System Setup menu
Using the System Setup menu
The following section shows you how to make
detailed settings to specify how you’re using
the receiver. It also explains how to fine-tune
individual speaker system settings.
1 Press on the remote control,
then press the SETUP button.
2 Use / to select the setting you want to
adjust then press ENTER .
• A.MCACC – This is a quick and effective
automatic surround setup (see
Automatically setting up for surround
sound (MCACC) on page 27).
• SP SETUP – Specify the size, number,
distance and overall balance of the
speakers you’ve connected (see Manual
speaker setup below).
• IN ASSIG – Specify what you’ve connected
to the component video inputs (see The
Input Assign menu on page 42).
• PRE OUT – Specify how to use the PRE
OUT outputs (see The Pre Out Setting on
page 42).
Manual speaker setup
These setting optimize surround sound
performance. You only need to make these
settings once (unless you change the
placement of your current speaker system or
add new speakers).
These settings are designed to fine-tune your
system, but if you’re satisfied with the settings
made in Automatically setting up for surround
sound (MCACC) on page 27, it isn’t necessary
to make all of these settings.
CAUTION
• The test tones used in the System Setup
are output at high volume.
Important
• Depending on the PRE OUT setting, there
will be differences in the speaker items that
can be adjusted.
1 Select ‘SP SETUP’ from the System Setup
menu.
2 Use / to select the setting you want to
adjust then press ENTER.
• SP SET – Specify size / number of speakers
connected (see Speaker setting on
page 40).
• X.OVER – Specify which frequencies will
be sent to the subwoofer (see Crossover
network on page 41).
• CH LEVEL – Adjust overall balance of your
speaker system (see Channel level on
page 41).
• SP DISTN – Specify the distance of your
speakers from the listening position (see
Speaker distance on page 41).
3 Press RETURN after making the
adjustments necessary for each setting.
BD DVD
INPUT SELECT
SOURCE SLEEP
TV
CONTROL
TV
INPUT
RECEIVER
RECEIVER DTV/TV ENTER
RETURN
AUDIO
PARAMETER
TUNER EDIT
TOOLS
MASTER
VOLUME
CATEGORY
BAND
MENU
HOME
MENU
SETUP
TOP
MENU
TUNE
TUNE
P R E S E T P R E S E T
RECEIVER
VSX-520_SYXCN_En.book 39 ページ ２０１０年４月１２日 月曜日 午後７時１３分