Pioneer VSX-909RDS - Manual (Page 64)

64
En
Using EON search
Refer to p.60 for more information about EON.
1 Tune into an EON FM station.
Refer to “Automatic and Manual Tuning” or “Direct Access
Tuning” on p.55 and 56.
• Even if the EON mode is off, when an FM station is broadcast-
ing a news of traffic information program, the EON indicator
lights in the display to inform you that the currently tuned
station carries the EON data service.
dB
STEREO SIGNAL
SELECT
ANALOG SP
A EON
RDS
STEREO TUNED
VOLUME
EON
MODE
FL
DIMMER
2 Press the EON MODE button to select the
mode.
dB
STEREO SIGNAL
SELECT
ANALOG SP
A EON
RDS
STEREO
TUNED
VOLUME
EON
MODE
FL
DIMMER
Each press changes the display as follows:
EON TA EON NEWS OFF
• When EON is set to OFF, the frequency being received will be
displayed, and then the RDS data will be displayed in the present
display mode.
• The EON mode is canceled if you switch to AM reception while
setting EON. Start once again after you return to FM reception.
• Simultaneous requests for Traffic Information (TA) and News
programs is not possible.
• You cannot operate the MEMORY and CHARACTER/SEARCH
buttons while the EON MODE indicator on the button lights.
• Functions other than TUNER cannot be changed while the EON
MODE indicator on the button blinks (while receiving EON
broadcast). If you want to change to a source other than TUNER,
press the EON MODE button and turn the EON mode off.
• When you are playing back TAPE 2 while setting EON, TAPE 2 will
be canceled by reception of EON. The function returns once more to
TAPE 2 after EON reception is finished.
• When EON is turned on and a function other than the tuner is
selected, the function will switch to the FM station automatically
when Traffic Information or News begins. When the program ends,
the original function will be restored.
• When the EON mode is on, the EON MODE indicator on the button
lights. During reception of the selected news or traffic information
broadcast, the EON MODE indicator on the button blinks.
memo
2
Using the Tuner