Bass peak level, Initial set up, See “setting up for surround sound – Pioneer VSX-909RDS User Manual
Page 39: This completes the speaker setup, Master volume
39
En
SET
UP
1 Select BASS PEAK LEVEL (if continuing
from CROSSOVER NETWORK it will already
be selected).
See “Setting Up for Surround Sound“
on page 30 if you are
unsure how to do this.
Press the ENTER button.
Bass Peak Level Manager
[
Setting Start
]
[Setting Cancel]
[EXIT]
2 Output the test tone for the LFE channel
and specify the peak level.
1 If your subwoofer has a volume control, set it to the middle
position before proceeding.
2 Select SETTING START.
3 Press the ENTER button.
Bass Peak Manager
[– 50]
[
Setting OK
]
Bass Peak Level
[EXIT]
MASTER VOLUME rotates to MIN (---dB). Then the test tone
is output to the subwoofer or front or surround speakers.
4 Use the 2 or 3 button arrows to gradually increase the level
of the LFE channel until the test tone begins to distort. Then
go back and leave the level setting at a point just before
that. Press the ENTER button and the receiver will remem-
ber this bass output level.
To exit before outputting the TEST TONE select EXIT and press
the ENTER button.
To exit while outputting the TEST TONE press the ENTER
button.
3 Select EXIT and press the ENTER button to
return to the SYSTEM SETUP MENU.
This completes the speaker setup.
Bass Peak Level
The LFE (Low Frequency Effect) channel in Dolby Digital, DTS or MPEG program sources can produce heavy
ultra-low bass tones that may exceed the capabilities of your speaker system. The following steps show you
how to set a maximum output level for the LFE channel. If continuing from Crossover Network go to step 1. If
starting fresh, complete steps 1-3 in “Setting Up for Surround Sound“ (p.30) first.
If you select SETTING CANCEL
no settings are input to the
receiver but the screen remains
on the TV. To escape the screen
you must select EXIT and press
the ENTER button.
memo
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
1-3
/DTS/MPEG
S0URCE
DVD/LD
TV/SAT
VCR1
VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO/
DIRECT
DSP
THX
LIGHT
MUTE
TV
VOLUME
MD/
TAPE1
TUNER
TVCONT
RECEIVER
USE
SETUP
MULTI
OPERATION
CLASS
MPX
DIRECT ACCESS
CHANNEL
STATION
TUNING
DISPLAY
RF ATT
TV CONTROL
FUNCTION
REMOTE SETUP
SYSTEM SETUP
INPUT
ATT
ADVANCED
MIDNIGHT
MULTI CH
INPUT
STANDARD
DIGITAL
NR
EFFECT/
CH SEL
SIGNAL
SELECT
BAND
SYSTEM
OFF
1
2
3
4
5
6
7
8
9
0
DISC
Î
¶
8
7
3
1
¡
4
¢
+
-
+
-
+
-
MULTI CONTROL
+
+
–
–
+
–
+10
MASTER VOLUME
Initial Set Up