Pioneer VSX-909RDS - Manual (Page 31)

31
En
SET
UP
Channel Delay (See p.35)
Set up all your speakers for the most realistic surround sound.
Adding a slight delay to some speakers enhances sound
separation and is particularly important for achieving a surround
sound effect. You need to figure out the distance from your
listening position to your speakers to add the proper delay.
Channel Level (See p.36-37)
Use to balance the volumes of your different speakers.
Crossover Network (See p.38)
This feature lets you select which bass frequencies will be sent
to the subwoofer or front speakers.
Bass Peak Level (See p.39)
Dolby Digital, DTS and MPEG audio sources include ultra-low
bass tones. Set the bass peak level as needed to prevent the
ultra-low bass tones from distorting the sound from the
speakers.
Dynamic Range Control (See p.40)
This feature makes possible excellent surround sound effects
when listening to Dolby Digital sources at low volumes.
Multi Channel In Setting (See p.41)
This feature lets you hook up a multi channel external decoder
that may give a higher quality when decoding discs.
4 Go on to the next page to continue set up.
If you don't want to make any settings go can exit this setup.
To exit the SYSTEM SETUP MENU and on-screen display press
SYSTEM SETUP button again.
After you complete one of the SYSTEM SETUP menus
and return to the basic SYSTEM SETUP screen the
receiver automatically moves the cursor to the next
SYSTEM SETUP menu. For example, if you've complet-
ed SPEAKER SETTINGS and returned to the basic
SYSTEM SETUP screen, CHANNEL DELAY will be
selected automatically. You can notice this on your TV
screen.
memo
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
4
/DTS/MPEG
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO/
DIRECT DSP
THX LIGHT
MUTE
TV
VOLUME
MD/
TAPE1 TUNER TVCONT
RECEIVER
USE SETUP
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION TUNING
DISPLAY RF ATT
TV CONTROL
FUNCTION
REMOTE SETUP
SYSTEM SETUP
INPUT
ATT
ADVANCED
MIDNIGHT MULTI CH
INPUT
STANDARD
DIGITAL
NR
EFFECT/ CH SEL
SIGNAL SELECT
BAND
SYSTEM
OFF
1 2 3
4 5 6
7 8 9
0
DISC
Î
¶ 8 7 3
1 ¡ 4 ¢
+ -
+ -
+ -
MULTI CONTROL
+ +
– –
+
–
+10
Initial Set Up