Pioneer DVR-5100H-S - Manual (Page 54)

Recording 06
54
En
• If you set the timer recording to use VPS/PDC, you
must switch the recorder into standby before the
timer recording is due to start for it to work correctly.
For non-VPS/PDC timer recordings there is no need
to switch the recorder into standby.
Tip
• Stations that use VPS/PDC typically include VPS/
PDC information in the teletext TV guide pages.
Please refer to these when setting your timer
recording.
Timer recording using the ShowView
programming system
This system makes programming timer recordings very
simple. Most TV guides publish ShowView programming
numbers with their program details. If you want to make
a timer recording of a program, you just input the
corresponding code. The date, start, stop and channel
settings are made automatically. All you have to do is tell
the recorder the recording mode, and whether it’s a
once-only recording or a regular recording.
1 Press S HOW V IEW to display the ShowView
program screen.
You can also access this screen from the Home Menu
(press
HOME MENU , select Timer Recording , then
ShowView ).
• Use the number buttons to enter the ShowView
programming number. (To clear the last digit
entered, press
CLEAR .)
• Press REC MODE to change the recording quality
(see also Setting the picture quality/recording time on
page 49). If Manual Recording is on, then you can
also select the
MN setting.
• Use the / (cursor left/right) buttons to select the
Once , Daily or Weekly recording option.
• Press HDD to record to the hard disk drive, or DVD to
record to a DVD.
• Use the and buttons to switch VPS/PDC On
or Off .
2 After making the settings, press ENTER.
The program details are shown at the bottom of the
screen for a few seconds then the screen is automatically
exited.
• If you haven’t set up the guide channels (or at least
the guide channel for the ShowView programming
number that you entered), the recorder will prompt
you to enter the channel number that the TV program
is showing on.
Tip
• You can check the timer program settings by
pressing TIMER REC to display the timer recording
screen.
HOME
MENU
HDD DVD
ENTER
CLEAR
REC MODE
ì
to input 3 9 9 2 4 0 9 ShowView#
Rec Mode
Rec Times
ShowView
MN21
Once Daily Weekly
REC MODE to change
to change level
to change
VPS/PDC Off to change
HDD DVD Rec to HDD to change
DVR-03_HDD_EU.book 54 ページ ２００３年９月１６日 火曜日 午後１２時２３分