Checking the characters input, Changing the color of single characters – Brother PERSONAL EMBROIDERY SYSTEM PE-150 User Manual
Page 37
34
Checking the characters input
Touch “CHECK” to check the characters which
have been selected.
Example: If the characters “abcdefghijk”
have been selected in
lowercase characters
The display appears as shown in the illustration
at left after the “k” is touched.
*
The machine will not accept your next
character if it exceeds the embroidery area.
To continue the word or phrase change to a
smaller size character.
By touching “CHECK”, the display will scroll
through all the characters from the first character
selected.
*
If all the characters selected appear on the
display at once, then the display will not
move.
Changing the color of single characters
If “MULTI COLOR” is selected before
embroidering starts, the machine will stop after
each character is sewn so that you can change
the thread.
ijk