Pioneer AVIC-F910BT - Manual (Page 100)

Activating the Auto PI seek for
preset stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can
be set to perform PI Seek during preset recall.
p The default setting for Auto PI Seek is off.
= For details, refer to Switching Auto PI seek
on page 128.
Using news programme
interruption
When a news programme is broadcast from a
PTY code news station, the navigation system
can switch from any station to the news broad-
cast station. When the news programme
ends, reception of the previous programme re-
sumes.
% Touching [NEWS] switches between
[On] and [Off].
Touch [
NEWS] until or appears in the
display.
To turn off news programme interruption,
touch [
NEWS] again.
A news programme can be cancelled by
touching [
Cancel].
You can also cancel the news programme by
changing the source or band.
p When the preset list is displayed, the NEWS
function icon will not be displayed.
Interruption icon status (e.g.
TRFC icon)
The indication of the status icon changes ac-
cording to the situation as shown below.
Indicator Meaning
or
TRFC
Information interruption is acti-
vated, but you will not receive data
since there is none.
Even if information interruption is
deactivated, data is still received.
(You can receive when you activate
the information interruption.)
or
TRFC
Information interruption is acti-
vated, and currently receiving data.
(No display)
Information interruption is deacti-
vated, and no data is being re-
ceived.
Using the radio (FM)
Engb
100
Chapter
18