Additional information – Pioneer DEH-X8600BT User Manual
Page 30

Black plate (30,1)
CD player
ERROR-07, 11, 12, 17, 30
The disc is dirty.
Clean the disc.
The disc is scratched.
Replace the disc.
ERROR-10, 11, 12, 15, 17, 30, A0
There is an electrical or mechanical error.
Turn the ignition switch OFF and back ON, or
switch to a different source, then back to the
CD player.
ERROR-15
The inserted disc is blank.
Replace the disc.
ERROR-23
Unsupported CD format.
Replace the disc.
FORMAT READ
Sometimes there is a delay between the start of
playback and when you start to hear any sound.
Wait until the message disappears and you
hear sound.
NO AUDIO
The inserted disc does not contain any playable
files.
Replace the disc.
SKIPPED
The inserted disc contains DRM protected files.
The protected files are skipped.
PROTECT
All the files on the inserted disc are embedded
with DRM.
Replace the disc.
External storage device (USB, SD)/iPod
NO DEVICE
No USB storage device or iPod is connected.
Connect a compatible USB storage device/
iPod.
FORMAT READ
Sometimes there is a delay between the start of
playback and when you start to hear any sound.
Wait until the message disappears and you
hear sound.
NO AUDIO
There are no songs.
Transfer the audio files to the USB storage
device and connect.
The connected USB storage device has security
enabled.
Follow the USB storage device instructions to
disable the security.
SKIPPED
The connected USB storage device contains
DRM protected files.
The protected files are skipped.
PROTECT
All the files on the connected USB storage device
are embedded with DRM.
Replace the USB storage device.
NOT COMPATIBLE
The connected USB device is not supported by
this unit.
! Connect a USB Mass Storage Class
compliant device.
! Disconnect your device and replace it with a
compatible USB storage device.
Non-compatible SD storage device
Remove your device and replace it with a
compatible SD storage device.
CHECK USB
The USB connector or USB cable has short-
circuited.
Check that the USB connector or USB cable is
not caught in something or damaged.
CHECK USB
The connected USB storage device consumes
more than maximum allowable current.
Disconnect the USB storage device and do not
use it. Turn the ignition switch to OFF, then to
ACC or ON and then connect only compliant
USB storage devices.
En
30
Appendix
Additional information