Pioneer X-HM50-K - Manual (Page 9)

11/2/23 X-HM50_En.fm
9
General control
Press the STANDBY/ON button to turn the power on.
To dim the display brightness, press the DIMMER
button on the remote control.
If you turn off and on the main unit with the volume
set to 27 or higher, the volume starts at 16 and fades
in to the last set level.
Turn the volume knob towards VOLUME (on main unit)
or press VOL +/– (on remote control) to increase or
decrease the volume.
When you press any of the following buttons, the unit
turns on.
•
iPod/iPhone , CD/USB , AUDIO/LINE (INPUT) , TUNER
(BAND) button on the remote control: Selected
function is activated.
• / button on the main unit: The unit turns on and
playback of the last function will start ( CD , TUNER ,
USB, iPod , AUDIO IN , LINE IN ).
The main unit will enter the stand-by mode (when iPod/
iPhone is not docked) after 15 minutes of inactivity during:
iPod/iPhone : No connection or in the pause mode.
CD/USB : In the stop mode.
The volume is muted temporarily when pressing the
MUTE button on the remote control. Press again to
restore the volume.
When the power is first turned on, the unit will enter the
extra bass mode which emphasises the bass
frequencies. To cancel the extra bass mode, press the
EXTRA BASS button on the remote control.
1 Press the BASS/TREBLE button to select “Bass”.
2 Within 5 seconds, press the VOL (+ / –) button to
adjust the bass.
1 Press the BASS/TREBLE button to select “Treble”.
2 Within 5 seconds, press the VOL (+ / –) button to
adjust the treble.
When the INPUT button on main unit is pressed, the
current function will change to different mode. Press
the
INPUT button repeatedly to select desired function.
Note
The backup function will protect the memorised
function mode for a few hours should there be a power
failure or the AC power lead becomes disconnected.
Setting the clock (Remote control only)
In this example, the clock is set for the 24-hour (00:00)
display.
1 Press the STANDBY/ON button to turn the power on.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the ENTER button. To
adjust the day, press the or button and then
press the ENTER button.
4 Press the or button to select 24-hour or 12-
hour display and then press the ENTER button.
n To turn the power on
After use:
Press the STANDBY/ON button to enter the power stand-
by mode.
Note
However, if iPod/iPhone is docked, the unit will begin
charging.
“
iPod charge” will be displayed.
n Display brightness control
n Volume auto fade-in
n Volume control
n Auto power on function
n Auto power off function
n Muting
n Extra-Bass control
STANDBY/ON
INPUT
PHONES AUDIO IN
TIMER
VOLUME
USB
X-HM50
INPUT
Dimmer 1
Dimmer 2
Dimmer off (Display is dim).
(Display gets dimmer).
(Display is bright).
n Bass control
n Treble control
n Equaliser
n Function
Pops
Vocal
Jazz
Flat
Game
Classic
Equaliser off.
For game.
For classical music.
For pop music.
Vocals are enhanced.
For jazz.
When the EQUALIZER
MODE button is pressed,
the current mode setting will
be displayed. To change to a
different mode, press the
EQUALIZER MODE button
repeatedly until the desired
sound mode appears.
CD DAB FM STEREO FM MONO
USB iPod Audio In Line In
The 24-hour display will appear.
(00:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 00:00 - PM 11:59)