Pioneer X-HM50-K - Manual (Page 23)

11/2/23 X-HM50_En.fm
23
Timer and sleep operation (Remote control only) (continued)
Checking the timer setting:
Cancelling the timer setting:
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered.
To reuse the same setting, perform the following
operations.
The radio, compact disc, iPod, USB, Audio In and Line
In can all be turned off automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the
STANDBY/ON button whilst “ SLEEP ” is
indicated. To cancel the sleep operation without setting
the unit to the stand-by mode, proceed as follows.
Sleep and timer playback:
For example, you can fall asleep listening to the radio
and wake up to CD in the next morning.
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
2 Within 10 seconds, press the or button to
select “Once” or “Daily”, and press the ENTER button.
3 Within 10 seconds, press the or button to
select “Timer Call”, and press the ENTER button.
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
2 Within 10 seconds, press the
or button to
select “Once” or “Daily”, and press the ENTER button.
3 Within 10 seconds, press the or button to
select “Timer Off”, and press the ENTER button.
Timer will be cancelled (the setting will not be
cancelled).
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
2 Within 10 seconds, press the or button to
select “Once” or “Daily”, and press the ENTER button.
3 Within 10 seconds, press the or button to
select “Timer On”, and press the ENTER button.
4 Press the STANDBY/ON button to enter the power
stand-by mode.
n Sleep operation
1 Play back the desired sound source.
2 Press the SLEEP button.
3 Within 5 seconds, press the direct search button to
set the time (1 minute - 99 minutes).
4 Press the ENTER button.
“SLEEP” will appear.
5 The unit will enter the power stand-by mode
automatically after the preset time has elapsed.
The volume will be turned down 1 minute before
the sleep operation finishes.
Whilst “ SLEEP ” is indicated, press the SLEEP button.
1 Whilst “SLEEP” is indicated, press the SLEEP button.
2 Within 5 seconds, press the “0” button twice until
“SLEEP 00” appears.
3 Press the ENTER button.
n To use timer and sleep operation
together
1 Set the sleep time (see above, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback
(steps 2 - 9, page 22).
Desired time 1-99 minutes
Sleep operation will
automatically stop
Sleep timer
setting
Timer playback
setting
End
time
Timer playback
start time