Pioneer DEH-P8400MP - Manual (Page 51)

Initial Settings
En 51
2 Press FUNCTION to select WARN .
Press FUNCTION until WARN appears in the
display.
3 Select WARN on or off with
5/∞.
Pressing
5/∞ will switch
Warning between on
and off and that status will be displayed (e.g.,
Warning :ON ).
Switching the flap auto open
For theft protection, the front panel opens auto-
matically and easily detaches. Flap auto open is
on as a default.
1 Press OPEN to open the front panel.
2 Press FUNCTION to select D OPEN .
Press FUNCTION until D OPEN appears in the
display.
3 Select Flap Auto on or off with
5/∞.
Pressing
5/∞ will switch
Flap Auto between on
and off and that status will be displayed (e.g.,
Flap Auto :ON ).
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using external equipment connected to this
unit.
1 Press OPEN to open the front panel.
2 Press FUNCTION to select AUX .
Press FUNCTION until AUX appears in the dis-
play.
3 Select AUX on or off with
5/∞.
Pressing 5/∞ will switch
AUX between on and
off and that status will be displayed (e.g.,
AUX :ON ).
Switching the dimmer setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the car’s headlights are turned on. You
can switch dimmer on or off.
1 Press OPEN to open the front panel.
2 Press FUNCTION to select DIM .
Press FUNCTION until DIM appears in the dis-
play.
3 Select DIM on or off with
5/∞.
Pressing
5/∞ will switch
Dimmer between on
and off and that status will be displayed (e.g.,
Dimmer :ON ).
Selecting the brightness
You can select the display brightness. Initially
this mode is set to 12.
1 Press OPEN to open the front panel.
2 Press FUNCTION to select BRIGHT .
Press FUNCTION until BRIGHT appears in the
display.
3 Select the desired brightness with
2/3.
• The display shows 0 – 15 .
English
Español
Deutsch
F
rançais
Italiano
Nederlands
09
Section