Pioneer DEH-P8400MP - Manual (Page 50)

Initial Settings
2 Press FUNCTION to select FM .
Press FUNCTION until FM appears in the dis-
play.
3 Select the FM tuning step with
2/3.
Pressing
2/3 will switch the FM tuning step
between 50 kHz and 100 kHz while AF or TA is
on. The selected FM tuning step will appear in
the display.
Note
• The tuning step remains at 50 kHz during
manual tuning.
Setting the DAB Priority
Function
When a hide-away DAB tuner (GEX-P700DAB) is
connected, you can set the product in this mode
so that the interruption of traffic information
from the hide-away DAB tuner takes
precedence over this product’s RDS traffic
announcement function.
When it is on
During DAB reception, when the selected ser-
vice component supports road traffic flashes
and transport flashes, reception is not inter-
rupted by this product’s RDS traffic announce-
ment.
When it is off
Interruption is by the first received news flash
from among this product’s RDS and the hide-
away DAB traffic information broadcasts.
1 Press OPEN to open the front panel.
2 Press FUNCTION to select DAB .
Press FUNCTION until DAB appears in the dis-
play.
3 Select DAB on or off with
5/∞.
Pressing
5/∞ will switch
DAB Priority between
on and off and that status will be displayed (e.g.,
DAB Priority :ON ).
Switching Auto PI Seek
The unit can automatically search for a different
station with the same programming, even dur-
ing preset recall.
1 Press OPEN to open the front panel.
2 Press FUNCTION to select A-PI .
Press FUNCTION until A-PI appears in the dis-
play.
3 Select A-PI on or off with
5/∞.
Pressing
5/∞ will switch
Auto PI between on
and off and that status will be displayed (e.g.,
Auto PI :ON ).
Switching the warning tone
If the front panel is not detached from the head
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press OPEN to open the front panel.
En 50
09
Section