Pioneer DEH-P8400MP - Manual (Page 25)

Built-in CD Player
En 25
Introduction of advanced built-in
CD player operation
1 FUNCTION display
Shows the function status.
1 Press OPEN to open the front panel.
2 Press FUNCTION to display the function
names.
Press
FUNCTION repeatedly to switch between
the following functions:
RPT (repeat play)— RDM (random play)—
T.SCAN (scan play)— PAUSE (pause)
• To return to the playback display, press BAND .
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the playback display.
Repeating play
Repeat play lets you hear the same track over
again.
1 Press OPEN to open the front panel.
2 Press FUNCTION to select RPT .
Press FUNCTION until RPT appears in the dis-
play.
3 Press 5 to turn repeat play on.
Repeat :ON appears in the display. The track
presently playing will play and then repeat.
4 Press
∞ to turn repeat play off.
Repeat :OFF appears in the display. The track
presently playing will continue to play and then
play the next track.
Note
• If you perform track search or fast
forward/reverse, repeat play is automatically
cancelled.
1
English
Español
Deutsch
F
rançais
Italiano
Nederlands
05
Section