Pioneer DEH-P8400MP - Manual (Page 42)

08
Section
En 42
Audio Adjustments
Introduction of audio
adjustments
1 AUDIO display
Shows the audio adjustments status.
2 PRESET EQ indicator
Shows which equalizer preset is presently
selected.
3 ASL indicator
Shows the level of ASL.
1 Press OPEN to open the front panel.
2 Press AUDIO to display the audio function
names.
Press
AUDIO repeatedly to switch between the
following audio functions:
Fad (balance adjustment)— EQ (equalizer curve
fine adjustment)— Bass (bass)— Treble
(treble)— Loud (loudness)— Sub-W1
(subwoofer1)/ NonFad (non fading output on/off
mode)— Sub-W2 (subwoofer2)/ NonFad (non
fading output setting mode)— HPF (high pass
filter)— SLA (source level adjustment)— ASL
(automatic sound levelizer)
• When the Subwoofer Controller setting is only
S.W Control:EXT , you cannot switch Sub-W1 .
(Refer to page 52.)
• You can select
Sub-W2 only when Subwoofer
output is switched on in Sub-W1 .
• When the Subwoofer Controller setting is only
S.W Control:EXT , you can switch the non fading
output on/off mode. (Refer to page 52.)
• You can select the non fading output setting
mode only when non fading output is switched
on in the non fading output on/off mode.
• When selecting the FM tuner as the source,
you cannot switch to
SLA .
• To return to the playback display, press BAND .
Note
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
1 2 3