Pioneer SC-LX88-K - Manual (Page 15)

15
When there are multiple units or the IP address of another device is 192.168.XXX.249*
* XXX in 192.168.XXX.249 varies depending on the environment.
‡ Because the IP address of the unit is duplicated, it is not possible to connect to the wireless
LAN router. Use the following method to change the IP address of the unit.
1
Initialize the unit. For the initialization method, refer to “Initialization” section (page 16).
2 Connect the unit and a computer by referring to “STEP 2-2 Connecting to a Wireless LAN Router
(Manual setting version)” (page 7)
I “Connecting the Unit to a Computer” (page 7).
3 Set from step 1 to step 3 by referring to “STEP 2-2 Connecting to a Wireless LAN Router
(Manual setting version)” (page 7)
I “Setting the Unit” (page 8).
4 Click [General Setup].
5 Click [LAN].
6 Set the [IP address] to 192.168.2.XXX*.
*In XXX in 192.168.2.XXX, set a unique value that is different from other devices.
4
5
6
7
Troubleshooting (continued)
Item name Description
IP address
Displays the IP address of this unit. Usually, you do not need to
change this setting.
Subnet Mask
Displays the subnet mask of this unit. Usually, you do not need to
change this setting.
DHCP Mode
Determines whether a DHCP server connection is used. Usually, the
setting is Auto and you do not need to change the setting.
Auto :
When the unit is connected to a wireless LAN router, the IP address of
this unit is automatically changed to “xxx.xxx.xxx.AAA.”
* “xxx.xxx.xxx.” is the IP address of the wireless LAN router.
* In AAA, the IP address of this unit set in LAN IP is held.
When the unit is connected to a computer, the DHCP server of this
unit is enabled to assign an IP address to the computer.
* You can only set the AAA part of the “xxx.xxx.xxx.AAA” IP address.
Use this when setting multiple units.
Disabled :
Disables the DHCP server auto detection function.
Set an IP address and subnet mask.
* When the DHCP server auto detection function is disabled, manually
acquire the IP address of the computer to be connected to the unit.
Lease Time
Set the expiration time of the IP address assigned by the unit when
the DHCP server of the unit is enabled. When the set time elapses, a
new IP address is assigned. Usually, you do not need to change this
setting.
IP address range
Set the IP address range assigned by the unit when the DHCP server
of the unit is enabled. Usually, you do not need to change this setting.
7 Click [Apply].
8 Set again by referring to “STEP 2-1 Connecting to a Wireless LAN Router (WPS button
version)” (page 5) or “STEP 2-2 Connecting to a Wireless LAN Router (Manual setting
version)” (page 7).
When 192.168.2.249 is entered in the web browser address field, an error occurs
‡ Refer to “Initialization” section (page 16) to initialize the unit.