Pioneer DVR-3100-S - Manual (Page 83)

The Initial Setup menu 12
83
En
DTS Out
You only need to make this setting if you connected this
recorder to an AV amplifier (or other component) using the
digital output.
• Default setting: On
If your AV receiver (or other connected component) has a
built-in DTS decoder, set to
On , otherwise set to Off .
Check the manual that came with the connected
component if you’re unsure whether it is DTS
compatible.
Important
• If you set to On with a non-DTS compatible amplifier,
noise will be output when you play a DTS disc.
• When set to On , there is no analog audio output
when playing a DTS DVD-Video disc.
• When playing a DTS audio CD (even when DTS Out
is Off ), noise is output from the analog outputs. Do
not play this through your amplifier and speakers.
• When playing a DTS audio CD, make sure that
Stereo is selected using the AUDIO button. See
Switching DVD soundtracks on page 43.
96kHz PCM Out
You only need to make this setting if you connected this
recorder to an AV amplifier (or other component) using the
digital output.
• Default setting: 96kHz 48kHz
If your AV receiver (or other connected component) is
compatible with high sampling rate audio (88.2 / 96 kHz),
set to
96kHz , otherwise set to 96kHz 48kHz . Check
the manual that came with the connected component if
you’re unsure whether it is compatible with high
sampling rate audio.
MPEG Out
You only need to make this setting if you connected this
recorder to an AV amplifier (or other component) using the
digital output.
• Default setting: MPEG PCM
If your AV receiver (or other connected component) is
MPEG audio compatible, set to
MPEG , otherwise set to
MPEG PCM . Check the manual that came with the
connected component if you’re unsure whether it is
MPEG compatible.
Language settings
OSD Language
• Default setting: English
This sets the language of the on-screen menus and
displays.
Audio Language
• Default setting: English
This setting is your preferred audio language for DVD
discs. If the language you specify here is recorded on a
disc, the recorder automatically plays the disc in that
language (although this depends on the
Auto Language
setting—see Auto Language on page 84).
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Digital Out
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out On
Off
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Digital Out
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out 96kHz 48kHz
96kHz
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Digital Out
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out MPEG
MPEG
PCM
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback OSD Language
Audio Language
Subtitle Language
Auto Language
DVD Menu Language
Subtitle Display English
Français
Deutsch
Italiano
Español
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback OSD Language
Audio Language
Subtitle Language
Auto Language
DVD Menu Language
Subtitle Display English
French
German
Italian
Spanish
Other
Initial Setup
DVR-03_UK.book 83 ページ ２００３年７月２８日 月曜日 午後６時３０分