Pioneer DVR-3100-S - Manual (Page 50)

Recording 06
50
En
Standard timer recording
The timer recording screen you can see all the timer
programs already set, clear programs and set up new
ones.
1 Press TIMER REC to display the Timer Recording
screen.
You can also access the Timer Recording screen from
the Home Menu (press
HOME MENU , select Timer
Recording , then Timer Recording (View) ).
This screen shows all the timer programs currently set.
• The amount of free space available on the currently
loaded recordable DVD is shown towards the bottom
of the screen.
• In the lower-right corner, the number of timer
programs already set and the number that use VPS/
PDC, is shown.
• Each row is for one timer recording program, with the
date and time information, frequency, channel,
recording mode and the VPS/PDC setting.
• If there are more than eight timer programs already
set, press NEXT to switch page (go back using
the PREV button).
• You can also clear a timer program by highlighting it
and pressing CLEAR .
2 Select ‘New Input’ to set a new timer program,
then press ENTER.
3 Enter the timer recording settings.
Use the
/
(cursor left/right) buttons to select a field;
use the / (cursor up/down) buttons to change the
value.
• Date – Choose a date up to one month in advance, or
select a daily or weekly program.
• Start – Set the recording start time.
• Stop – Set the recording end time (maximum length
of a timer recording is 6 hours).
• CH – Choose a channel (1–99, excluding skip
channels), or one of the external inputs from which to
record.
• Mode – Select FINE , SP , LP or EP (See Setting the
picture quality/recording time on page 46). If Manual
Recording is on, then you can also select the MN
setting.
• VPS/PDC – The VPS/PDC system automatically
adjusts the recording time so that even if a program
is not running to schedule you won’t miss it. For VPS/
PDC to work properly, you must input the correct
announced time and date of the program you want to
record.
Note that VPS/PDC may not work with every station
and that Optimized Recording will not work if VPS/
PDC is on.
• Recorded Title Name – Optionally, you can enter a
name for the recording up to 32 characters.
4 After entering all the timer recording
information, press ENTER.
The main timer recording screen is displayed again. The
timer program you just input appears in the list.
• If Optimized Rec (see Optimized Rec on page 85) is
set to On (and VPS/PDC is off), the recorder will
adjust the recording quality to try and fit the
recording on the disc.
5 To exit the timer recording screen, press HOME
MENU.
• If you set the timer recording to use VPS/PDC, you
must switch the recorder into standby before the
timer recording is due to start for it to work correctly.
For non-VPS/PDC timer recordings there is no need
to switch the recorder into standby.
HOME
MENU
ENTER
CLEAR
TIMER REC
ì
New Input
WED 13/12 7:00 8:00 Pr 3 SP Off
Date Start Stop CH Mode VPS/PDC
Timer Recording
DVD Remain 1h00m(FINE)
1/1
VPS/PDC Recorded Title Name
Date Start Stop CH Rec Mode
Input
TUE 12/12 10 00 11 00 Pr 7 SP
OFF
Timer Recording
DVR-03_UK.book 50 ページ ２００３年７月２８日 月曜日 午後６時３０分