Pioneer DVR-3100-S - Manual (Page 25)

Getting started 04
25
En
Chapter 4
Getting started
Switching on and setting up
When you switch the recorder on for the first time, you
can make several basic settings using the Setup
Navigator feature. This takes you through setting the
clock, the internal TV tuner and the video and audio
output settings.
If you’re using the recorder for the first time, we strongly
recommend you use the Setup Navigator before starting
to use the recorder.
1 Switch on your TV and set the video input to this
recorder.
2 Press the STANDBY/ON button on the remote
control or the front panel to switch on.
When you switch on for the first time, your TV should
display the Setup Navigator screen. (If the Setup
Navigator doesn’t appear, you can also access it from the
Initial Setup menu; see page 77).
• If this recorder is connected to a compatible TV using
a full-wired 21-pin SCART cable, the recorder will take
a few seconds to download country, TV screen size
and language information. (Check the manual that
came with your TV for compatibility information.)
3 Use the / (cursor up/down) buttons to choose
a language, then press ENTER.
4 Press ENTER to start setting up using the Setup
Navigator.
• If you don’t want to use the Setup Navigator, press
(cursor down) to select Cancel , then press ENTER to
exit the Setup Navigator.
5 Select the Auto Channel Setting (‘Auto Scan’ or
‘Download from TV’), or ‘Do not set’, then press
ENTER.
DVD RECORDER
STANDBY/ON
ENTER
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Clock Set
Input Line System
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator
Setup Navigator
Language
English
français
Deutsch
Italiano
Español
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Clock Set
Input Line System
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator
Setup Navigator
Start
Cancel
Complete this setup before you
start using your recorder.
Please use the Initial Setup if you
want to make more detailed settings.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Clock Set
Input Line System
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator
Setup Navigator
Auto Channel Setting
Auto Scan
Download from TV
Do not set
Initial Setup
DVR-03_UK.book 25 ページ ２００３年７月２８日 月曜日 午後６時３０分