Pioneer DVR-3100-S - Manual (Page 77)

The Initial Setup menu 12
77
En
• Mode1 – Through function only for the antenna
terminal
• Mode2 – No through function
• Off – Through function for both antenna terminal
and AV connector
Remote Control Set
• Default setting: Recorder1
You only need to set this if you are using more than one
Pioneer DVD recorder in the same room.
So that each remote control operates only its own
recorder, make this setting different for each recorder
and remote in the room.
There are three different recorder IDs. When set to
Recorder2 or Recorder3 , the remote control mode is
shown in the front panel display.
Note that as soon as you change the recorder ID, the
remote becomes inoperative until you change the remote
to the same ID.
To set the remote, press and hold RETURN and a number
button ( 1 , 2 or 3 ) until the indicator on the remote lights.
Setup Navigator
• Default setting: n/a
The Setup Navigator appears automatically when you
switch on the recorder for the first time (or after resetting
the recorder). It is also available from the Initial Settings
menu should you need it at any other time.
See also Switching on and setting up on page 25.
Tuner settings
Auto Channel Setting : Auto Scan
This recorder has a built-in TV tuner for recording PAL B/
G, PAL I, SECAM L and SECAM D/K TV programs off the
air or from analog cable TV. We recommend that you first
use the Auto Channel Setting described here to tune into
the channels in your area, then if there are any unwanted
channels, you can disable them using Channel Skip
(described below).
1 Choose ‘Tuner’ from the Initial Setup menu, then
‘Auto Channel Setting’, then ‘Auto Scan’.
2 Select your country then press ENTER to start
tuning.
• You can cancel before auto tuning has finished by
pressing ENTER again.
After auto scanning has finished, the channel mapping
screen appears showing which channels have been
assigned to which program numbers.
Use the PREV/NEXT buttons to display the previous/next
page.
3 Press HOME MENU to exit this screen.
Note
• You can fine-tune individual stations using the
Manual CH Setting feature. See Manual CH Setting
below for how to use this.
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Clock Setting
Input Line System
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator Recorder1
Recorder2
Recorder3
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Clock Setting
Input Line System
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator Start
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Auto Channel Setting
Manual CH Setting
Channel Swapping
Set VIDEO Plus+ CH Auto Scan
Download from TV
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Auto Channel Setting
Manual CH Setting
Channel Swapping
Set VIDEO Plus+ CH Auto Channel Setting Auto Channel Setting
Country UK
Initial Setup
Pr System CH Name
1 I 26
2 I 33
3 I 23
4 I 30
5 I 37
6 I 35
7 I 39
8 I 26
Pr System CH Name
9 I 9
10 I 25
11 I 11
12 I 12
13 I 13
14 I 14
15 I 15
16 I 16
1/7 Channel Mapping
DVR-03_UK.book 77 ページ ２００３年７月２８日 月曜日 午後６時３０分