Pioneer DVR-3100-S - Manual (Page 51)

Recording 06
51
En
Tip
• Stations that use VPS/PDC typically include VPS/
PDC information in the teletext TV guide pages.
Please refer to these when setting your timer
recording.
Timer recording using the VIDEO Plus+
®
programming system
This system makes programming timer recordings very
simple. Most TV guides publish PlusCode programming
numbers with their program details. If you want to make
a timer recording of a program, you just input the
corresponding code. The date, start, stop and channel
settings are made automatically. All you have to do is tell
the recorder the recording mode, and whether it’s a
once-only recording or a regular recording.
1 Press ‘VIDEO Plus+’ to display the VIDEO Plus+
program screen.
You can also access this screen from the Home Menu
(press
HOME MENU , select Timer Recording , then
VIDEO Plus+ ).
• Use the number buttons to enter the PlusCode
programming number. (To clear the last digit
entered, press
CLEAR .)
• Press REC MODE to change the recording quality
(see also Setting the picture quality/recording time on
page 46). If Manual Recording is on, then you can
also select the
MN setting.
• Use the / (cursor left/right) buttons to select the
Once , Daily or Weekly recording option.
• Use the and buttons to switch VPS/PDC On
or Off .
2 After making the settings, press ENTER.
The program details are shown at the bottom of the
screen for a few seconds then the screen is automatically
exited.
• If you haven’t set up the guide channels (or at least
the guide channel for the PlusCode programming
number that you entered), the recorder will prompt
you to enter the channel number that the TV program
is showing on.
Tip
• You can check the timer program settings by
pressing TIMER REC to display the timer recording
screen.
VIDEO Plus+ programming with the power
off
You can enter a PlusCode programming number when
the recorder is in standby.
Important
• You can’t use this feature until you have set up the
guide channels. See Set VIDEO Plus+ CH on page 79
• You can’t change the recording mode.
• You can’t program daily or weekly timer recordings.
VIDEO Plus+
ENTER
CLEAR
REC MODE
ì
to input 3 9 9 2 4 0 9 PlusCode#
Rec Mode
Rec Times
VIDEO Plus+
MN21
Once Daily Weekly
REC MODE to change
to change level
to change
VPS/PDC Off to change
ENTER
CLEAR
PREV NEXT
ì
VIDEO Plus+
DVR-03_UK.book 51 ページ ２００３年７月２８日 月曜日 午後６時３０分