Pioneer PDP-SX5080D - Manual (Page 65)

Using the HDMI Control 13
65
En
English
Chapter 13
Using the HDMI Control
Using the HDMI Control functions
You can operate such Pioneer devices as a recorder, player, AV
system or HD AV Converter that support the HDMI Control
functions using the remote control of the plasma television.
The HDMI Control functions include playback of content using on-
screen control panel on the plasma television, recording of a TV
programme while watching, timer recording using a programme
list on the connected recorder, and confirmation of timer recording
registered in the recorder. For details, see the table below.
Note
• Maximum number of devices that can be connected and
controlled using the remote control unit of the plasma television
is as follows: recorder x 2, player x 2, AV system or HD AV
Converter x 1.
• Not all device operations may be available for HDMI Control
functions.
HDMI Control functions
Note
• When using the HDMI Control functions, operate the remote
control unit while pointing it toward the remote control sensor
(
t) located at the bottom right of the front panel of the plasma
television.
• You cannot use two or more HDMI terminals at the rear of the
plasma television at the same time except “Power Off” and
“Display Language Setup” functions.
Function Description
Usable
devices
Playback of
content The proper input source is
automatically selected and the
content is played back on the
plasma television as you press
PLAY on the connected device Recorder/
player
On-screen
control Recorder/player operation can be
controlled on-screen or with the
remote control unit of the plasma
television (play, stop, fast forward/
reverse, etc.) Recorder/
player
Recording of
TV
programme The programme now watching can
be recorded using the remote
control unit of the plasma
television Recorder
Timer
recording Timer recording using a
programme list on the recorder
connected Recorder
Confirmation
of recording
schedule Recording schedule registered in the
recorder can be displayed and
confirmed on the screen using the
remote control unit of the plasma
television Recorder
Display
Language
Setup Information on the display menu
language is transferred to the
recorder or player connected to the
plasma television. For details, see
the operation manual that came
with the recorder or player. Recorder/
player
AV system
control Receiver/amplifier operation can
also be controlled with the remote
control unit of the plasma
television (volume, surround mode
and input selection of the HDMI
terminal) AV system
Power On The connected recorder can be
turned On when the plasma
television is turned On.
The plasma television can be
turned On when the connected
recorder(s) or player(s) is turned
On and images are input to the
plasma television.
Recorder
Recorder/
player
Power Off The connected device(s) can be
turned Off when the plasma
television is turned Off Recorder/
player/AV
system
HD AV
Converter
control An HD AV Converter can also be
connected and controlled (For
details, see page 68) HD AV
Converter
Function Description
Usable
devices
• Press i+/– or e to adjust
volume for the AV system.
• Press , , , , ENTER,
RETURN ( ) or colour ( BLUE,
RED, YELLOW, GREEN) buttons
to use such functions as the disc
navigator and electronic
programme guide (EPG) on the
connected recorder or player.
PDP-5080XD.book Page 65 Friday, April 27, 2007 1:12 PM