Pioneer STZ-D10Z-R - Manual (Page 22)

2 Use a/b to select ‘Rhythm Machine’, then press ENTER.
A Rhythm Sequence selection screen for the Rhythm Machine mode will be shown.
Rhythm Machine
Preset 1 Preset 1
Preset 2
Preset 3
Preset 4
Preset 5
3 Start a track playback by selecting a rhythm sequence.
! To end the Rhythm Machine playback, press the EXIT button. The device will resume to the Stop status for the track that was played back in a
function effective before the Rhythm Machine mode.
Note
By pressing the TOOLS button and selecting Setting during a playback in the Rhythm Machine mode, the screen will return to the settings screen for
the Rhythm Machine mode in step 2.
Use various playback control functions
Memory/USB/STEEZ
Tempo Control function
You can adjust the tempo without changing the pitch of the track.
% Adjust the tempo by pressing the TEMPO+/- during a playback.
The tempo can be adjusted within the range between -50% and +50%.
Notes
! When a new track is played back or a new function takes effect, the tempo will switch back to the default settings (0%).
! You cannot use the tempo control function during a playback in the Battle or DJ Mix mode.
Eight Skip function
You can change the playback position in units of eighths (eight beats).
! You can adjust from 1- to 8- eighths each time you press a button. Please refer to Configure the Playback settings on page 25 for more information.
% Adjust the playback position by pressing the 8 SKIPo/p during a playback.
To move to the preferred playback position, please press the button repeatedly.
Note
You cannot use the Eight Skip function during a playback in the Battle, DJ Mix or Rhythm Machine mode.
Using Cue control
You can place a cue point at any desired location within a music track, then play back later from that point.
! You can set the cue point for each track.
1 Press CUE MEMO during playback.
A cue point will be placed.
Memory
Song2
Artist1
2:08 5:25
103 +10%
BPM
Cue point is set.
2 Press CUE CALL to call a cue point.
Notes
! Only one cue point can be placed per music track.
! You cannot use the cue control during a playback in the Battle, DJ Mix or Rhythm Machine mode.
! When MIXTRAX is used for the following operation after cue point has been set-up, the set-up cue point will be deleted.
- When analyzed music data is re-sent to the unit or USB memory.
- When all the data sent to the unit are deleted.
22 En