BT Glide 7163 - Manual (Page 55)

Operate your answering machine remotely
1. Dial your BT Glide phone number and when the
OGM starts to play, press the ✱ button.
2. The answering machine announces “Please enter
your security code”. Enter your 4-digit security code
(default setting: 0000).
3. You have now accessed your answering machine
and you can operate it using the keypad buttons
on the phone you are using.
The commands are:
2 To play all messages
3 To play new messages
4 To skip backwards through messages
5 To delete the current message
6 To skip forwards through messages
7 To set the answer mode
8 To play/check the OGM
9 To record a new OGM
0 To switch the answering machine on/off
55 Using the answering machine
BT Glide – Edition 07 – 20.01.06 – 7163
If you experience any problems, please call the Helpline on 0870 605 8047
Incorrect PIN
If you enter the incorrect PIN
code, you will hear “Incorrect
security code”. You have two
chances to enter the correct
remote access security code
before your BT Glide hangs up.