BT Glide 7163 - Manual (Page 54)

Remote access
You can operate your answering machine remotely
from any Touchtone
™ phone by calling your BT Glide
and entering a 4-digit security code. The pre-set
code is 0000.
Switch remote access on/off
In order to remotely access your answering machine,
you will need to switch remote access on.
1. Press Menu , use the Navigation buttons to
highlight the menu and press Select or .
2. Scroll to Answer Machine and press Select .
3. Scroll to Remote Access and press Select .
4. Press or to select either Off or On and press
Save to confirm.
Change the remote access PIN code
1. Press Menu , use the Navigation buttons to
highlight the menu and press Select or .
2. Scroll to Answer Machine and press Select .
3. Scroll to Security Code and press Select .
4. Enter the 4-digit PIN code you want to use and
press Save .
54 Using the answering machine
IMPORTANT
It is recommended that you
change the security PIN to a
4-digit code of your own for
security reasons (see below).
BT Glide – Edition 07 – 20.01.06 – 7163
If you experience any problems, please call the Helpline on 0870 605 8047
To prevent unauthorised access
to your answering machine it is
recommended that you change
the PIN code from the original
setting 0000.
Keep a note of your remote
access PIN code by writing it in
the space provided on page 73.