Barco R9010570 - Manual (Page 72)

7. Advanced
A dialog box is displayed
Image 7-56
6. Use ←or →, the numeric keys on the remote, or the keypad to change the runtime warning setting.
W ARNING : Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
technician.
7.7 Image files
Overview
• Introduction to Image files
• Load file
• Forced file load
• Auto Image
• Edit file
• Save as (create a custom file)
• Rename file
• Copy
• Delete
7.7.1 Introduction to Image files
Image files
An image file contains the main characteristics of a source (number of active lines,...). The projector’s memory contains a list of files
corresponding to the most common sources : standard files.
When a new source corresponds to one of these files, a custom file is created. The file is not automatically saved as a custom file.
The Save as... function allows to create and save a custom file.
The active file can always be edited in order to fit exactly the source specifications.
AutoImage creates automatically the best suited image file (custom file) for a new source. AutoImage is used
when :
- a new source is detected: AutoImage creates a new custom file which can always be edited if necessary.
- the AutoImage is launched via the button on the RCU, the projector’s OSD or from the desktop’s OSD
File notation
The notation of the image file happens as follows :
/Standard/[email protected]
Type of file : standard or custom
Resolution
Vertical freq
file extension = xml
Image 7-57
68 R59770079 BARCO ID H250/500 23/07/2007