Billion Electric Company 400G - Manual (Page 86)

Billion 400G Router
Chapter 4: Configuration
83
IGMP
IGMP, known as Internet Group Management Protocol, is used to management hosts from multicast group.
IGMP Forwarding: Accepting multicast packet. Default is set to Enable.
IGMP Snooping: Allowing switched Ethernet to check and make correct forwarding decisions. Default is set to
Disable.
VLAN Bridge
This section allows you to create VLAN groups and specify the members.
Edit: Edit your member ports in selected VLAN group.
Create VLAN: To create another VLAN group.
Logout
To exit the router’s web interface, choose Logout. Please ensure that you have saved the configuration settings
before you logout.
Be aware that the router is restricted to only one PC accessing the configuration web pages at a time. Once a
PC has logged into the web interface, other PCs cannot get access until the current PC has logged out of the
web interface. If the previous PC forgets to logout, the second PC can access the page after a user-defined
period, by default 3 minutes. You can modify this value using the Advanced – Device Management section of
the web interface. Please see the Advanced section of this manual for more information.