Billion Electric Company 400G - Manual (Page 17)

Billion 400G Router
Chapter 3: Basic Installation
14
Information from your ISP
Telkom ADSL connections use PPPoE, and automatically assign a WAN IP address to your router. The following
information is provided should you wish to connect to an alternative ISP.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE
VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service Name, and
Domain Name System (DNS) IP address (this is automatically set by the Telkom
network but be set manually should this be required).
PPPoE
(Multisession) VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service Name,
Domain Name System (DNS) IP address and multiple-sessions on the same PVC.
PPPoE / PPPoE
with Pass-through
VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service Name, and
Domain Name System (DNS) IP address (this is automatically set by the Telkom
network but be set manually should this be required). In addition, additional WAN
address can be assigned using PPPoE dialer.
PPPoA
VPI/VCI, VC / LLC-based multiplexing, Username, Password and Domain Name
System (DNS) IP address (it can be automatically assigned by your ISP when you
connect or be set manually).
RFC 1483 Bridged VPI/VCI, VC / LLC-based multiplexing to use Bridged Mode.
RFC 1483 Routed
VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask,
Gateway address, and Domain Name System (DNS) IP address (it
is a fixed IP address).
IPoA Routed
(IP over ATM)
VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask,
Gateway address, and Domain Name System (DNS) IP address (it
is a fixed IP address).