Billion Electric Company 400G - Manual (Page 83)

Billion 400G Router
Chapter 4: Configuration
80
Device Management
The Device Management configuration settings allow you to control your router’s security options and device
monitoring features.
Device Host Name
Host Name: This is the name given to your router; this should be in the form of name.name
Example:
Host Name: homegateway ==> Incorrect
Host Name: home.gateway or my.home.gateway ==> Correct
Embedded Web Server ( 2 Management IP Accounts)
HTTP Port: This is the port number of the router’s embedded web server (for web-based configuration.) The
default value is the standard HTTP port, 80. Users may specify an alternative if, for example, they are running a
web server on a PC within their LAN.
Management IP Address: You may specify the IP addresses allowed to logon and access the router’s web
server. Setting the IP address to 0.0.0.0 will disable IP address restrictions, allowing users to login from any IP
address.
Expire to auto-logout: Specify a time frame for the system to auto-logout the user’s configuration session.
For Example: User A changes the routers HTTP port number to 100, specifies their own IP address of 10.0.0.55,
and sets the logout time to be 100 seconds. The router will only allow User A access from the IP address
10.0.0.55 to logon to the Web GUI by typing:
http://10.0.0.2:100 in their web browser. After 100 seconds, the
device will automatically logout User A.