Olympus VN732PC - Manual (Page 55)

6
Troubleshooting
55
EN
Problem Possible cause Solution
The display is blank.
The battery is not inserted
properly.
Check that the positive and negative
terminals of the battery are placed
correctly (
☞ P.8).
The remaining battery power
is low.
Replace the battery (
☞ P.8).
The power is OFF. Turn the power ON (
☞ P.9).
Unable to operate the
voice recorder.
The remaining battery power
is low.
Replace the battery (
☞ P.8).
The power is OFF. Turn the power ON (
☞ P.9).
The voice recorder is in HOLD
mode.
Release HOLD mode (
☞ P.13).
Unable to record.
There is no remaining memory. Erase unneeded files (
☞ P.32).
The maximum number of
recordable files has been reached.
Select another folder ( ☞ P.15).
Playback is inaudible.
The earphones are connected to
the EAR jack. To output the playback through the built-
in speaker, disconnect the earphones.
The volume is set to [00]. Adjust the volume (
☞ P.24).
Unable to erase a file.
The file is locked.
You must unlock the file before you can
erase it (
☞ P.37).
The file is a read-only file.
Unlock the file, or undo the read-only
setting on a PC.
Unable to write index
marks/temp marks.
The maximum number of marks
(99) has been reached.
Erase unneeded marks (
☞ P.31).
The file is locked. Unlock the file ( ☞ P.37).
The file is a read-only file.
Unlock the file, or undo the read-only
setting on a PC.
The PC is unable to
recognize the voice
recorder.
VN-733PC model only
[AC Adapter] has been selected
for [USB Settings].
Select [PC] for [USB Settings] (
☞ P.47).
Troubleshooting