Olympus SH1 - Manual (Page 67)

67 EN 67 EN
For the operation method, refer to (P. 47).
d Settings Menu 3
Adjusting interval settings d [Interval Settings]
Submenu 2 Submenu 3
Frame 1 to 99 (frames)
Start Waiting Time 00 to 60 (minutes)
Interval Time 10/20/30/40/50 (sec.)/01 to 60 (minutes)
Designing type of level gauge display
d [Level Gauge Settings]
Submenu 2 Submenu 3 Application
Level Gauge
Display
Off Hide level gauge.
On Display level gauge.
Level Adjust
Reset Restore the factory default angle.
Adjust
Set the virtual horizon to the camera’s current
angle.
Level gauge display
• Indicate the orientation of the camera. The “tilt”
direction is indicated on the vertical bar and the
“horizon” direction on the horizontal bar.
• Use the indicators on the level gauge as a guide.
• If the level gauge does not indicate the orientation
correctly, calibrate the angle of the level gauge.
250 250 F6.9 0.0 0.0
P P