Olympus SH1 - Manual (Page 32)

32 EN
s (Advanced Movie mode)
You can shoot the movie by using the evolving movie function.
Submenu Description
s (Photo in
Movie)
Captures still images as you shoot a movie. During a single
movie, you can capture a maximum of 12 still images.
}
(60p Movie)
Shoots a smooth movie at 60 frames/second. Image size is fixed
at full HD (1920×1080).
; (High-
Speed Movie)
Shoots a fast-moving subject and play back in slow motion.
HS120fps (1280×720), HS240fps (432×324)
/ (Time
Lapse Movie)
Generate a movie for 20 seconds by shooting successive and
interval images at set shooting time. You can set “shooting time”
in the function menu. The camera automatically ends shooting
for a set shooting time and record a time lapse movie.
• Except in Photo in Movie, you cannot take still images by pressing the shutter
button. The Photo in Movie function is also enabled when shooting in P mode
or M mode.
• The flash is not available when capturing still images using Photo in Movie.
• Images captured during Photo in Movie are displayed as a group.
• Only when High-Speed Movie, you can select [c], [d], and [Off] of the
self-timer.
• While you shoot Time Lapse Movie, you cannot change the focus position.
• The camera may go into sleep mode during Time Lapse Movie, but the
shooting is performed according to the setting.
• When the battery gets low during Time Lapse Movie, the camera stops
shooting and starts saving the images you have taken on the card. For the
battery remaining, the camera may fail to generate a movie. Use a full-
charged battery.
• In Time Lapse Movie, pressing the R (movie) button while shooting stops the
shooting.
The length of the movie is depending on the number of frames.