Olympus PT-042 - Manual (Page 63)

EN 25
En
How to select the shooting scene
Locking AF during underwater shooting
Set the mode dial (1) on the Case
to set the camera’s shooting mode
to SCN, and press the up/down
arrow pad (2) to select Underwater
Wide-Angle 1, Underwater Wide-
angle 2 or Underwater Macro. Then
press the OK button (3) to enter the
selection.
To switch to a different underwater
shooting mode, press the MENU
button on the Case, press the down
arrow pad, select SCN on the LCD
monitor, and press the OK button.
Then press the arrow pad to select
the desired underwater shooting
mode from the LCD monitor display,
and press the OK button to enter the
selection.
When Underwater Wide-Angle 1 or
Underwater Macro is selected, the
down arrow pad (AFL button) on the
case functions as the AF LOCK
button. Pressing the button once
activates the AF lock mode. With
focus locked, you can concentrate
on operating the shutter whenever a
perfect picture opportunity arises.
Note:
To cancel the AF lock status, press the down arrow pad (AFL button) again.
OK button
Select the
scene
Mode dial
knob
Functions as the
AF LOCK button
in the
Underwater
Wide-Angle 1
and Underwater
Macro modes.
PT-042_EN.book Page 25 Tuesday, December 11, 2007 1:09 PM