Olympus E-P5 - Manual (Page 38)

38 EN
Basic operations
2
Using a fl ash (fl ash photography)
The fl ash can be set manually as required. The fl ash can be used for fl ash
photography in a variety of shooting conditions.
1 Press the fl ash switch to pop up the fl ash unit.
Flash switch
2 Press the # button (I) to display options.
3 Use HI to choose a fl ash mode and press Q.
• The options available and the order in which they are displayed vary depending on
the shooting mode. g “Flash modes that can be set by shooting mode” (P. 39)
AUTO Auto fl ash
The fl ash fi res automatically in low light or
backlight conditions.
# Fill-in fl ash The fl ash fi res regardless of the light conditions.
$ Flash off The fl ash does not fi re.
!/ # ! Red-eye reduction fl ash
This function allows you to reduce the red-eye
phenomenon. In S and M modes, the fl ash
always fi res.
# SLOW
Slow synchronization
(1st curtain) Slow shutter speeds are used to brighten dimly-lit
backgrounds.
!SLOW
Slow synchronization
(1st curtain)/Red-eye
reduction fl ash
Combines slow synchronization with red-eye
reduction.
# SLOW2/
2nd
Curtain
Slow synchronization
(2nd curtain)
The fl ash fi res just before the
shutter closes to create trails
of light behind moving light
sources.
# FULL,
# 1/4 etc.
Manual
For users who prefer manual operation. If you
press the
INFO button, you can use the dial to
adjust the fl ash level.
4 Press the shutter button all the way.
# Cautions
• In [ !/#!(Red-eye reduction fl ash)], after the pre-fl ashes, it takes about 1 second
before the shutter is released. Do not move the camera until shooting is complete.
• [ !/#!(Red-eye reduction fl ash)] may not work effectively under some shooting
conditions.
• When the fl ash fi res, the shutter speed is set to 1/320 sec. or slower. When shooting
a subject against a bright background with the fi ll-in fl ash, the background may be
overexposed.