Olympus E-P5 - Manual (Page 108)

108 EN
Other
7
Error codes
Monitor
indication
Possible cause Corrective action
No Card
The card is not inserted, or it
cannot be recognized. Insert a card or insert a different
card.
Card Error
There is a problem with the card.
Insert the card again. If the
problem persists, format the card.
If the card cannot be formatted, it
cannot be used.
Write Protect
Writing to the card is prohibited.
The card write-protect switch is
set to the “LOCK” side. Release
the switch. (P. 113)
Card Full
• The card is full. No more
pictures can be taken or no
more information such as print
reservation can be recorded.
• There is no space in the card
and print reservation or new
images cannot be recorded.
Replace the card or erase
unwanted pictures.
Before erasing, download
important images to a PC.
Clean the contact area of
the card with a dry cloth.
Clean Card
Format
Card Setup
Set
Card cannot be read. Card may
not have been formatted.
• Select [Clean Card], press
Q and turn off the camera.
Remove the card and wipe dry
the metallic surface with a soft,
dry cloth.
• Select [Format][Yes], and then
press Q to format the card.
Formatting the card erases all
data on the card.
No Picture
There are no pictures on the
card. The card contains no pictures.
Record pictures and play back.
Picture Error
The selected picture cannot be
displayed for playback due to
a problem with this picture. Or
the picture cannot be used for
playback on this camera.
Use image processing software to
view the picture on a PC.
If that cannot be done, the image
fi le is damaged.
The Image Cannot
Be Edited
Pictures taken with another
camera cannot be edited on this
camera.
Use image processing software to
edit the picture.
Picture Error
Images cannot be transferred
between devices that are
currently receiving or transmitting
data.
Increase the amount of memory
available on the card, for example
by deleting unwanted images,
or choose a smaller size for the
images being transmitted.