Olympus E-P5 - Manual (Page 119)

119 EN
Using separately sold accessories
11
11
Electronic Viewfi nder (VF-4)
The VF-4 electronic viewfi nder switches on automatically when you look through it.
While the viewfi nder is on, the camera monitor display is switched off. You can select
whether to automatically switch the display between the viewfi nder and monitor using
the menu settings. Note that menus and other settings information are still displayed
on the camera monitor when the viewfi nder is switched on.
# Cautions
• In the following situations, the viewfi nder may not switch off automatically.
When in sleep mode/when shooting using movie, 3D, multiple exposure, live bulb, live
time etc./when the shutter button is pressed halfway/when the monitor is pulled out
• The viewfi nder may also fail to turn on automatically when viewed in certain situations,
such as when wearing glasses, or under strong sunlight. Change to manual settings.
 Attaching and removing an electronic viewfi nder
Remove the connector cover while pressing down on the lock release button, and then
keep pressing into the camera hot shoe until it will go no further.
• To remove, turn off the camera, and remove while pressing down on the lock release
button.
Attaching Removing Lock release button
Connector cover
Hot shoe
cover
 Using a diopter adjustment dial
Turn on the camera power, and then set the diopter adjustment dial to a position at
which an image is visible in the view fi nder.
• The angle can be changed up to a maximum 90°.
u button
Eye sensor
Diopter adjustment dial
Using separately sold accessories