Olympus E-P5 - Manual (Page 104)

104 EN
Connecting the camera to a computer
6
 Private connection
The following procedure can be used to connect.
1
Select [Connection to Smartphone] in [Playback Menu], and press Q.
2
Follow the operation guide displayed on the monitor, pressing Q to
proceed.
• The SSID, password and QR code are displayed on the monitor.
3
Enter the SSID and password into your smartphone.
• If you use OI.Share on your smartphone to read the QR code, the SSID and
password are entered automatically.
• From the second time you connect, connection will be performed automatically.
• An index of images on the camera is displayed in OI.Share on your smartphone.
 One-time connection
1
Select [Connection to Smartphone] in [Playback Menu], and press Q.
• The SSID, password and QR code are displayed on the monitor.
2
Enter the SSID and password into your smartphone.
• If you use OI.Share on your smartphone to read the QR code, the SSID and
password are entered automatically.
• From the second time you connect, a confi rmation message fi rst will be displayed
asking if you wish to change your password.
 To end the connection
1
Press
MENU on the camera or touch [Stop] on the monitor screen.
• You can also end the connection with OI.Share or by turning off your camera.
• The connection ends.
# Cautions
• Combination of the wireless LAN function with OLYMPUS PENPAL, an Eye-Fi card,
or similar may result in a signifi cant reduction in camera performance.
• The wireless LAN antenna is contained in the camera grip. Where possible, avoid
covering the antenna with your hands.
• During wireless LAN connection, the battery will run down faster. If the battery is
running low, the connection may be lost during a transfer.
• Connection may be diffi cult or slow in proximity to devices that generate magnetic
fi elds, static electricity or radio waves, such as near microwaves, cordless telephone.