Olympus DS-3400 - Manual (Page 57)

57
3
Changing the USB Class
Changing the USB Class (USB Class)
PLAY/OK
PLAY/OK,
+
,
–
,
9, 0
button
1 Select [USB Class] at the [Device Menu]
screen, then press the
PLAY/OK or 9
button.
Refer to P.34 regarding each menu item settings.
2 Press the
+
or
–
button to select
[Composite] or [Storage].
Composite...In the 3 classes of Storage, USB audio
and human interface, USB connection is possible.
While USB connection in [composite], the recorder can
be used as the USB speaker and the USB microphone.
Storage...USB connection is possible in only
Storage class.
3 Press the PLAY/OK button to complete the
setup screen.
[Composite Set] or [Storage Set] will light up on
the display, and it will return to the [Device Menu]
screen.
If you press the 0 or F1(BACK) button the setting
will be cancelled and it will return to the [Device Menu].
Pressing the F3(EXIT) button will cancel the
contents being set and take you out of the MENU.
4 Press the F3(EXIT) or 0 button to
complete the setting.
When this recorder is connected to the computer
for the first time after being changed to
“Remote(Composite)”, the driver will be installed
automatically to the computer.
BACK EXIT
Device Menu
Beep
Power Save
Time & Date
USB Class
Reset Settings
Cue/Rev Sound
BACK EXIT
USB Class
Composite
Storage
BACK EXIT
USB Class
Composite
Storage
Composite
Set
You can set the USB class of this recorder with
a USB connection to [Composite] or [Storage].
Set to [Composite] when using this recorder
as a USB speaker or a USB microphone.
F1, F3 button