Barco iQ Pro G500 - Manual (Page 72)

7. Image Menu
0
42
83
125
167
40
80
120
160
FILM
24 f/s
VIDEO PAL
50f/s
NTSC VIDEO
60 f/s
0
1/20s
1/30s
50
83
133
167
2/2 3/2
Image 7-21
film to video conversion: 2/2 and 2/3 pull down method
The filmmode detection insures that these converted signals are shown without artefacts, especially motion artefacts due to bad
de-interlacing.
Image 7-22
This function may cause undesired effects on standard sources, therefore it can be disabled (OFF) at any time
Enabling/disabling the filmmode detection
1. Press MENU to activate the Toolbar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select Filmmode detection
5. Press → to pull down the menu
6. Use ↓ or ↑ to enable or disable the Filmmode detection
7. Press ENTER
A white bullet shows the active setting (image 7-23)
66 R5976491 IQ PRO G500 01/02/2007