Lint filter, Dryer motor overload protector – Alliance Laundry Systems H242I User Manual

Page 37

Text mode
Original mode

504509

Lint Filter

CLEAN THE LINT FILTER BEFORE DRYING EACH
LOAD. (Refer to illustration below for lint filter
location.) Cleaning the lint filter is important because a
layer or pad of lint on the filter will block the flow of air

through the dryer, thus reducing the efficiency of the
dryer. The clothes will take longer to dry and energy will
be wasted.

Dryer Motor Overload Protector

The motor overload protector stops the motor in the event
of an overload. After cooling, the overload protector will
reset itself. The dryer can be restarted by pressing the

PUSH-TO-START button. If the overload protector
cycles again, remove the unit from use and call the
service person to correct the problem.

. . .

LINT

FILTER

H247IE1A

. . .