Before first use, Control panel, 1 initial cleaning – AEG BP8314001M User Manual
Page 8: 2 setting and changing the time, Changing the time of day, 1 electronic programmer
4. BEFORE FIRST USE
WARNING!
Refer to the Safety chapters.
4.1 Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and
Cleaning".
4.2 Setting and changing the
time
After the first connection to the mains,
all symbols in the display are on for
some seconds. For the subsequent few
seconds the display shows the software
version.
After the software version goes off, the
display shows h and 12:00.
Setting the time of day:
1.
Touch
or
to set the hours.
2.
Touch
or
.
3.
Touch
or
to set the minutes.
4.
Touch
or
.
The Temperature / Time display shows
the new time.
Changing the time of day
You can change the time of day only
when the appliance is off. Touch
.
flashes in the display. To set the new
time of day, use the above procedure.
5. CONTROL PANEL
5.1 Electronic programmer
1
2
3
4
5
6
7
8
9
10
Use the sensor fields to operate the ap-
pliance.
Sensor
Field
Function
Description
1
-
DISPLAY
Shows the current settings of the appli-
ance.
2
ON / OFF
To activate and deactivate the appli-
ance.
3
OPTIONS
To set an oven function, an automatic
programme or a cleaning function (se-
lected models only). Straight access to
an oven function when the appliance is
off.
8
www.aeg.com