AEG BP8314001M - Manual (Page 13)

7.1 Count Up Timer
Use the Count Up Timer to monitor how
long the appliance operates. It is on im-
mediately when the appliance starts to
heat.
Reset the Count Up Timer: touch
.
Touch until the display shows
"00:00" and the Count Up Timer starts
to count up again.
You cannot use the Count Up
Timer when Duration or End is
set.
7.2 Setting the DURATION
1. Activate the appliance and set an
oven function and temperature.
2.
Touch again and again until the
display shows . flashes in the
display.
3. Use or to set the minutes for
DURATION.
4. Touch to confirm.
5. Use or to set the hours for
DURATION.
If you touch or while you
set the DURATION, the appli-
ance switches to the setting of
the END function.
6. When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the dis-
play. The appliance deactivates.
Touch a sensor field or open the
oven door to stop the acoustic sig-
nal.
7. Deactivate the appliance.
7.3 Setting the END
1. Activate the appliance and set an
oven function and temperature.
2.
Touch again and again until the
display shows . flashes in the
display.
3. Use or to set the END (first
you set the minutes and then the
hours) and
or to confirm.
4. When the set time ends, an acoustic
signal sounds for two minutes.
symbol and the time setting flash
in the display. The appliance deacti-
vates.
5. Touch a sensor field or open the
oven door to stop the acoustic sig-
nal.
6. Deactivate the appliance.
7.4 Check result (selected
models only)
If you set the END or DURATION func-
tion, two minutes before the end of
cooking an acoustic signal sounds and
the lamp activates. The appliance goes
to the setting of the END or DURATION
function. During these two minutes you
can examine the results of the cooking,
and, if necessary, add the END or DURA-
TION time.
7.5 Setting the SET+GO
1. Set an oven function (or programme)
and temperature (refer to "Setting
the oven function" and "Changing
the temperature").
2. Set the DURATION (refer to "Setting
the DURATION").
3. Touch again and again until
flashes in the display.
4.
Touch to set the SET+GO func-
tion.
The display shows and with an
indicator. This indicator shows which
clock function is activated.
5. Touch a sensor field (apart from
ON / OFF) to start the SET+GO
function.
You can use the SET+GO func-
tion only when the DURATION is
set.
7.6 Setting the MINUTE
MINDER
Use the MINUTE MINDER to set a
countdown (maximum 2 h 30 min). This
function has no effect on the operation
of the oven. You can set the MINUTE
MINDER at any time and also when the
appliance is off.
ENGLISH
13