AEG BP8314001M - Manual (Page 20)

Indicator of the setting
menu
Description Value to set
SET2 RESIDUAL HEAT INDI-
CATOR
ON / OFF
SET3 CLEANING REMINDER ON / OFF
SET4
1) KEY TONE CLICK / BEEP / OFF
SET5 FAULTY TONE ON / OFF
SET6 SERVICE MENU ---
SET7 RESTORE SETTINGS YES / NO
SET8
2) TIME EXTENSION ON / OFF
1) It is not possible to deactivate the tone of the ON / OFF sensor field.
2) Selected models only
You can set the settings menu
only when the appliance is off.
Activate the Settings menu:
1. If necessary, deactivate the appli-
ance
.
2. Touch and hold for three sec-
onds.
The display shows "SET1" and "1"
flashes.
3. Touch / to set the setting.
4.
Touch .
5. Touch / to change the value
of the setting.
6. Touch .
10.5 Automatic switch-off
For safety reasons the appliance deacti-
vates automatically after some time:
• if an oven function operates.
• if you do not change the oven temper-
ature.
Temperature Switch-off time
30 °C - 115 °C 12.5 h
120 °C - 195 °C 8.5 h
200 °C - 245 °C 5.5 h
250 °C - maximum °C 3.0 h
After the Automatic switch-off, touch a
sensor field to operate the appliance
again.
The Automatic switch-off works
with all oven functions, apart
from Slow Cook, Core tempera-
ture sensor, Duration, End, Time
delay.
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– When the appliance is activated.
– If you touch a sensor field during
the night brightness (apart from
ON / OFF), the display goes back to
the day brightness mode for the
next 10 seconds.
– If the appliance is deactivated and
you set the Minute Minder. When
the Minute Minder function ends,
the display goes back to the night
brightness.
20 www.aeg.com