Clock functions, 4 fast heat up function, 5 energy saving – AEG BP8314001M User Manual

Page 12

6.4 Fast heat up function

The Fast heat up function decreases the
heat up time.
Activating the Fast heat up function:
Touch and hold

for more than three

seconds.
If you activate the Fast heat up function,
the bars on the display

flash one by

one and

comes on to show that

the function operates.
Additional information:
• Do not put food into the oven when

the Fast heat up function operates.

• The Fast heat up is not available with

all oven functions. An acoustic signal
sounds if the Fast heat up is not avail-
able for the set function.

6.5 Energy saving

The appliance contains features
which help you save energy
during everyday cooking:
• Residual heat:

– When the heating function

or programme operates, the
heating elements are deacti-

vated 10% earlier (the lamp
and fan continue to oper-
ate). For this feature to oper-
ate, the cooking time must
be longer than 30 minutes or
you must use the clock func-
tions (Duration, End, Time
delay). This feature does not
operate with the grill func-
tions.

– When the appliance is off,

you can use the heat to keep
food warm. The clock / re-
sidual heat display shows
the remaining temperature,
and the bars show the tem-
perature as it decreases.

• Cooking with the lamp off -

Touch

to deactivate the

lamp during cooking.

• Deactivating the display - If

necessary, you can fully deacti-
vate the appliance. Touch
and

at the same time until

the display goes out. This step
also activates the appliance.

• Eco functions - refer to "Oven

functions".

7. CLOCK FUNCTIONS

SYM-

BOL

FUNCTION

DESCRIPTION

COUNT UP TIM-

To set count up. It shows how long the appliance

operates. This function has no effect on the oper-

ation of the appliance.

TIME OF DAY

To examine the time of day. For changing the

time of day refer to 'Setting the time of day'.

DURATION

To set how long the appliance operates.

END

To set when the appliance deactivates. You can

use Duration and End at the same time (Time de-

lay), if the appliance is to be activate and deacti-

vate automatically later.

SET+GO

To start the appliance with necessary settings

with only one touch of the sensor field, any time

later.

12 www.aeg.com