AEG BP8314001M - Manual (Page 16)

8.5 Automatic programmes
with the core temperature
sensor
The core temperature of the food is de-
fault and fixed in programmes which use
the core temperature sensor. The pro-
gramme ends when the appliance is at
the set core temperature.
1. Activate the appliance.
2. Touch again and again until the
display shows .
3. Install the core temperature sensor
(refer to "The core temperature sen-
sor").
4.
Touch or to see the core
temperature sensor programmes.
When a core temperature sensor
programme is set, the display shows
the cooking time,
and .
5. Touch or the settings save auto-
matically after five seconds.
6. When the set time ends, an acoustic
signal sounds for two minutes.
flashes.
The appliance deactivates.
7. Touch a sensor field or open the
oven door to stop the acoustic sig-
nal.
9. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
9.1 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to set:
• The oven temperature: refer to the ta-
ble for roasting in the recipe book.
• The core temperature: refer to the ta-
ble for the core temperature sensor in
the recipe book.
Only use the core temperature
sensor supplied or the correct re-
placement parts.
1. Activate the appliance.
2. Put the tip of the core temperature
sensor (with
on the handle) into
the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the front of
the appliance. The display shows
and the default set core tem-
perature. The temperature is 60 °C
for the first operation, and the last
set value for each subsequent oper-
ation.
4. Touch or to set the core
temperature.
5. Touch or the settings save auto-
matically after 5 seconds.
Useful information:
You can set the core temperature
only when
flashes. If is in
the display but does not flash before
you set the core temperature, touch
16 www.aeg.com