AEG Voxtel S100 - Manual (Page 40)

40
If you don‘t want to pick up the call, you can press OK again to listen
through the handset earpiece, or press to stop the screening and
return the display to “SCREEN?“.
12 TROUBLESHOOTING
Problem Cause Solutions
No dialling tone
when pressing key
tThe connection
cord of the base
station is not
plugged in.
tThe adapter cord
is not plugged in
correctly in the
base station.
tAnother handset
is using the base
to make a call.
tWrong telephone
line cord.
tCheck the
connections.
Unplug and plug
back in the mains.
Check that the
telephone line cord
has been plugged
into the base.
tCheck the mains
adapter is firmly
plugged.
tWait until the line
is unoccupied.
tUse the original
line cord supplied.
When connected
to a PBX, no and/or
wrong connection
after dialling.
tDialling prefix
is needed.
tInsert the
dialling prefix.
“SEARCH‘G“
is displayed
tBase station
out of range.
tBase station
not connected
to mains.
tReduce the range.
tConnect base
station to mains.
The call does
not work
tService not
activated or
wrong operator
or wrong dialling
mode setting.
tCheck your
Subscription with
network or change
the dial mode.