AEG Voxtel S100 - Manual (Page 24)

24
An alarm tone will be emitted from the earpiece to alert the user
the alarm time is reached. Once the user presses any key or presses
and holds to disable the alarm, the display will revert to the call
duration.
>During paging or ringing, the alarm will not sound when the alarm
time is reached. However, if the snooze function is enabled and there
is no paging or ringing, the alarm will sound again at the end of the
snooze period.
10.2.1 Turn on/off the alarm
tPress and
/ to select “ALARM”
tPress
OK
and / to show “ON” or “OFF”.
tPress
OK
to confirm your choice.
Note:
If “ON” is selected, you will be prompted to set the alarm time.
10.2.2 Set the alarm time (if the alarm is set to be “ON”)
tFollow steps 1 to 3 in section “10.2.1 Turn on/off the alarm”.
tEnter the alarm time in 24 hour format.
tPress to display “SNOOZE”.
tPress
OK
and / to show “ON” or “OFF”.
tPress
OK
to confirm your setting.
10.3 Handset settings
10.3.1 Set the ringer melody for internal calls
tPress and
/ to select “HS SET”.
tPress
OK
and / to select “RINGER”.
tPress
OK
and / to select “INT RING”.
tPress
OK
and / to select the ringtone you want to hear for internal
calls.
Note:
There are 10 ring tones, and each will play as you step through the list.
tPress
OK
to confirm.
10.3.2 Set the ringer melody for external calls
tPress and
/ to select “HS SET”.
tPress
OK
and / to select “RINGER”.